Battery Holder Modification

The following modification was developed and submitted by Walt Malec to aid A10 owners in keeping their A10 batteries in a fixed position.

The battery holder modification is simple. For the late A10 battery trays that have stamped out half-round ears at the bottom, simply grind off the ears. Use 1/16" thick sheet metal and cut two (2) pieces 1" X 1.5". Weld these in place of the original ears with the 1.5" side in the vertical. It holds the battery from moving in the lateral direction. The new replacement batteries for the original Lucas MLZ9E battery are not identical in size (thinner in the fore-aft direction). To solve that, Walt used sheet rubber in the front to "shim" it from moving and used another piece under the wire clip in the rear. Seems to keep the battery captive.

Return to BSA A10 Super Rocket homepage
Sitemap


BSA Resources
Beeza Bill's BSA A10
BSA A10 Super Rocket
BSA A10 Sheldon's EMU
BSA at Bikelinks